OVERVIEW:The 2.4″ Colour TFT display with a micro SD card slot is now available as a SHIELD for Arduino UNO.It has a four-wire resistive touch screen, a micro SD card socket, a reset switch, and a convenient Arduino Uno shield footprint.Features:2.4-inch LCD TFT display has Bright, 4 white-LED backl..
OVERVIEW:
Skip the wiring and start playing in 30
secondsSlim and slick board designSupport Arduino UNO and Arduino Mega2560 and
other development board Arduino DUE line, without any wiring.Arduino libraries provide.This board also supports STM32, C51 and other
..
OVERVIEW:Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in the market. It is 100% suitable for beginners. And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yoursel..
OVERVIEW:The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, and a power jack, an ICSP header, and a reset but..
OVERVIEW:Compatible with Arduino Mega pinoutReset the button up topICSP headerLots of GND and +5V railsDIP prototyping area makes it easy to add more chipsSOIC prototyping area above USB jack for up to 14-pin SOIC chip, narrow medium or wide package.Use 'mini' or 'medium' breadboardTwo 3mm LEDs with..
OVERVIEW:Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to suppor..
OVERVIEW:The Arduino Yún is a microcontroller board based on the ATmega32u4 and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWrt named Linino OS. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (..
OVERVIEW:
Arduino GPS shield is a GPS module breakout
board designed for Global Positioning System receiver with SD interface. It is
easy to use for recording the position data into the SD card. 5V/3.3V compatible
operation voltage level makes it compatible with Arduino boards, leaf maple,
IF..
OVERVIEW:Keyes new beginner starter kit, pay more attention to beginners learning. Users can get rid of the difficult technological learning, from modules used to quick-start production. The suite is a collection of some commonly used electronic components, combining we provide graphic tutorials, le..
OVERVIEW:
The module is based on a touch-sensing IC
(TTP223B) capacitive touch switch module. In the normal state, the module
output low, low power consumption; When a finger touches the corresponding
position, the module output high, if not touched for 12 seconds, switch to
low-power mode.
..
OVERVIEW:This Arduino shield has been designed for Data Logging to an SD card and also has an onboard Real-Time Clock, so you can easily time stamp your readings, you can also use the Adafruit libraries which work great with these!This board is fully assembled with stackable header pins.Just add you..
OVERVIEW:Go to the “BUY NOW” button and have it at your doorstep.Explore W11stop.com to find the latest “Arduino” products and other electronic components at discounted prices in Pakistan with cash-on-delivery service available throughout the country...
OVERVIEW:The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports),..
OVERVIEW:The Micro is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button...
OVERVIEW:The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always..
OVERVIEW:This is a great battery-backed real-time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for data logging, clock-building, time stamping, timers and alarms, etc. The DS1307 is the most popular RTC and wo..
OVERVIEW:The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software, and document..
OVERVIEW:
Arduino Uno Proto Shield gives the possibility to carry your
Arduino projects from the breadboard and turn them into a proper circuit and also
use your specially designed circuits with Arduino.
You can use a proto shield without soldering. By a Mini
Breadboard you placed on the mi..
OVERVIEW:The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/USB replacement or you can put it into a com..