Menu
Your Cart
Due to variation in dollar rate, prices are subject to change without prior notice. Please confirm prices before placing an order.

Selco M8100.0070 Synchroscope

Selco M8100.0070 Synchroscope  Price in Pakistan
Inquiry
Selco M8100.0070 Synchroscope
  • Stock: Inquiry
  • Model: CPCB-O-09
Rs0/-

OVERVIEW:

M8100 Synchroscope with/without Check Synchronizing Relay.  Many Voltages available, and options with the Check Synchronizing Relay.  The M8100 Synchroscope provides illuminated indication of the frequency and phase deviation between voltages on two separate AC systems (e.g. a generator and a busbar). The M8100 will also indicate whether or not the two systems are live.
A moving light dot indicates the frequency deviation. The magnitude of the frequency deviation is indicated by the speed and direction of the movement.
Clockwise movement indicates that the frequency is too high on the incoming system. Counter clockwise movement indicates that the frequency is too low. A steady light dot at 6 o’clock position indicates zero frequency deviation and 180 degrees phase deviation. Exact synchronization. frequency and phase accordance is achieved when the light dot is steady at the 12 o’clock position (when the green LEDs ignite).

The M8100 scale is made up from 38 bright red LEDs. The resolution provided by the 38 LEDs is almost as fine as a pointer synchroscope, however the LED based design is far better at withstanding environmental influence from vibration, temperature and humidity.
Then the M8100 is fitted with a Check Synchronizing Relay, in addition to the normal synchroscope function, this unit contains a circuit for automatic closing of the generator circuit breaker.  On the rear side is a button for combined adjustment of limits for voltage difference, phase difference and frequency difference. These limits are related together to obtain max. operational performance.  This function also enables the check synchronizer relay to close the generator breaker to a dead busbar e.g. during a power failure. Condition for this function is that the unit has detected the generator to be within voltage limits and the busbar voltage below the busbar voltage offset level. All other parameters will be disregarded.

Features:

  • Same accuracy as pointer synchroscope
  • 38 illuminated points (LEDs)
  • Indication and bus and generator voltage
  • Fully insulated voltage inputs
  • Optional closure relay
  • 50 hour burn-in before test
  • Certified for marine use

Document:

Product Details
Product NameSelco M8100.0070 Synchroscope
PriceRs. 0/-
POWER
Consumption2 x 3VA max
VoltageDifference : 10 - 20%
Summary
Voltage range110%
Weight0.7kg
HARDWARE FEATURES
Output VoltageMax. ±6V DC
Supply Voltage415/480V.
TECHNICAL SPECIFICATION
Maximum Voltage660V
Operating Temperature-20°C to +70°C
General Specification
ContactsRating : AC: 250V, 1.2V, 125VA, DC: 30V, 1A, 30W
FrequencyDifference : 0.15 - 0.3Hz Combined setting
ModelM8100.0070
TypeSynchroscope.
Dimensions96 x 96 x 80mm (H x W x D)
WIRELESS FEATURES
Frequency Range35 - 70Hz

Write a review

Note: HTML is not translated!
Bad Good
Captcha