Menu
Your Cart

Selco T4800.0030 Load Sharer

Selco T4800.0030 Load Sharer  Price in Pakistan
Inquiry
Selco T4800.0030 Load Sharer
  • Stock: Inquiry
  • Model: CPCB-O-04
Rs0/-

OVERVIEW:

The Load Sharer T4800 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4800 units).
The T4800 will continuously measure and compare the active current on the generator to an external DC reference signal connected to the “parallel lines” input. The T4800 will increase or decrease the speed of the generator (through the governor) if it finds the active current level to be either too low or two high. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller.

Features:

  • Active load sharing
  • System frequency control
  • Relay based speed control
  • Reverse power protection
  • Soft unload with breaker trip
  • 50 hour burn-in before test
  • Certified for marine use

Document:

Product Details
Product NameSelco T4800.0030 Load Sharer
PriceRs. 0/-
POWER
ConsumptionVoltage 4VA at UN Current 0.4VA at IN
VoltageDifference : 10 - 15%
Summary
Voltage range70 - 110%
Weight0.7kg
HARDWARE FEATURES
Output VoltageMax. ±6V DC
Supply Voltage415/480V.
TECHNICAL SPECIFICATION
Maximum Voltage660V
Operating Temperature-20°C to +70°C
General Specification
ContactsRating : AC: 400V, 2A, 250VA, DC: 110V, 2A, 100W
FrequencyAdjustment : 48 - 62Hz
ModelT4800.0030
TypeLoad Sharer. with reverse power trip, unload trip and sync. Control For Electromechanical Governor.
Dimensions70 x 150 x 115 mm (H x W x D)
WIRELESS FEATURES
Frequency Range35 - 70Hz

Write a review

Note: HTML is not translated!
Bad Good
Captcha