Menu
Your Cart
"Due to currency devaluation, the prices are subject to change without prior notice. Please confirm the price before placing the order."

Lutron DW-6093 Digital 3 Phase Power Analyzer

Lutron DW-6093 Digital 3 Phase Power Analyzer price in Paksitan
Inquiry
Lutron DW-6093 Digital 3 Phase Power Analyzer
  • Stock Availability: Inquiry
  • Model: LUTN-68
Product Views: 4528
Rs. 0/-

OVERVIEW:

The DW-6093 can conduct analysis tasks on 1 phase 2 wire, 1phase 3 wire, 3 phase 3 wire and 3 phase 4 wire installations. Voltage and current readings are given in true RMS values.

The Lutron DW-6093 Power Analyser is an economical measurement solution for a multitude of single phase and 3 phase test and measurement tasks. It is easy to operate and has a clear backlit 3.2”x2.4” LCD display. The system comes complete with three 1200 amp rigid clamps, 4 test leads and alligator clips and a 2G SD card with carry bag. Data which is saved can be transferred on the SD card directly into a PC with excel spread sheets, for analysis, or we can supply the SW-U801-WIN PC software and USB interface cable to look at the data directly on the PC.

Features:

  • Three Phase Power Data logger for Power Monitoring and Load Studies
  • Configure to any standard power system, single phase two or three wire and three phase delta or wye
  • Measure AC Voltage up to 600 volts True RMS
  • Measure AC Current up to 1200 Amps with included clamps (3000 Amps with optional flex probes)
  • KW, KVA, KVAR, Power Factor, Phase Angle, Frequency, KWH, VAH, VARH
  • Save data to removable SD memory card in .xls files for easy integratoin with any spreadsheet software
  • Internal Clock with time/date stamp on all recorded data
  • Recording rates from every two seconds to every two hours (user programable)
  • CT and PT scalable
  • Resettable KWH Consuption Totalizer 
  • 2 GB memory card included
  • Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W.
  • 3 current probes (CP-1201) are included, if change the current probes, the calibration procedures are not necessary.
  • Current probe input signal/ranges with selection:
  • Input signal (ACV) : 200 mV/300 mV/500 mV/1 V/2 V/3 V. 
  • Ranges (ACA) : 20 A/200 A/2000 A/30 A/300 A/3000 A /6000 A.
  • Meter can cooperate with other universal current probes.
  • Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe (CP-1201), AC to DC 9V adapter, 4G SD memory card and Carrying bag.
  • Voltage & Current are the True RMS value.
  • True Power (KW, MW, GW).
  • Apparent Power (KVA, MVA, GVA).
  • Reactive Power (KVAR, MVAR, GVAR).
  • Watt-Hour (WH, SH, QH, PFH).
  • Power Factor (PF), Phase Angle (Degree).
  • Voltage range : 10 to 600 ACV.
  • Current range : 0.2 to 1200 ACA, CP-1201.
  • Programmable CT ratio (1 to 600) and PT ratio (1 to 1000).
  • ACV input impedance is 10 Mega ohms.
  • Safety Standard : IEC 1010, CAT III 600V.
  • Built-in clock and Calendar, real time data record with SD memory card , sampling time can be set from 2 to 7200 seconds. Just slot the SD card into the computer, all the measured values with the time information (year, month, data, hour, minute, second) can be downloaded to the Excel directly, then user can make the further data analysis by himself.
  • Powered by AA (UM-3) DC 1.5 V x 8 PCs batteries (Alkaline type) or DC 9V adapter.
  • Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02 and Data Acquisition softwares, SW-U811, SW-E802.
  • Optional current probes : CP-1201, CP-200, CP-2000, CP-2011, CP-3000, CP-3001, CP-6001.
  • User can order the meter only (without the current probes) with the special request if intend to cooperate their own current probes.
  • Patented.

Document:

Product Details
Product Name Lutron DW-6093 Digital 3 Phase Power Analyzer
Price Rs. Inquiry/-
Display Specification
Display 81.4 X 61 mm ( 3.2 X 2.4 inch )
Summary
Current range 0.2 ACA to 1200 ACA, auto range/manual range
Data hold Freeze the display reading
Safety Standard IEC1010 CAT III 600 V
Voltage range 10 ACV to 600 ACV, auto range
Sampling Time Approx. 1 second
Circuit Custom one-chip of microprocessor LSI circuit
Weight 955g
TECHNICAL SPECIFICATION
Data Output RS232 computer serial interface
Operating Humidity Less than 80% R.H..
General Specification
Clamp Max : 50 mm ( 2.0 inch ) Dia
Data Record SD Card Record
Frequency response Clamp : 40 Hz to 1 KHz
Operating Temperature 0 to 50 C ( 32 to 122 ) F
Over Indicator LCD display show " OL "
Power ON/OFF : Manual OFF by push button
Under Indicator LCD display show " UR "
Wire connections 1P/2W, 1P/3W, 3P/3W, 3P/4W
Dimension Meter : 225 X 125 X 64 mm | Clamp : 210 X 64 X 33mm

Write a review

Note: HTML is not translated!
Bad Good