Your Cart
Due to variation in dollar rate, prices are subject to change without prior notice. Please confirm prices before placing an order.

Lutron CP2000 AC/DC Current Clamp Adapter

Lutron CP2000 AC/DC Current Clamp Adapter  Price in Pakistan
Lutron CP2000 AC/DC Current Clamp Adapter
  • Stock: Inquiry
  • Brand: Lutron
  • Model: MTAM-270


Lutron CP-2000 Digital Clamp Meter is one measuring instrument that can be used in measuring electric current. When measuring electrical current using a multimeter, we should cut the cable or disconnect it and connect the meter to the circuit that is to be evaluated or measured. But if you use a clamp meter or an amperage pliers, you can do a current measurement by just clamping it on one of the cables or on the conductor.

Clamp Meter Digital Lutron CP-2000 is a device that can be used in measurements in the technical world, or for those of you who need a measurement of the current in your electrical wiring, this one measuring medium will really suit you. Electric current measuring instrument is apparently flexible, so it will be easier to use. This measuring instrument has a high level of accuracy, so the progress of the measurement will satisfy the user of this meter.


  • Range: 20A / 200A / 2000A
  • Output sensitivity: 100mV/A, 10mV/A, 1mV/A
  • Output voltage: 2ACV (20A, 200A, 2000A)
  • Max. conductor size: 51mm (2.1 inch) Dia
  • Operation frequency: 50Hz/60Hz
  • Optional current probe for DW-6093, DW-6095
  • When change the new probe, the calibration procedures are not necessary
  • Output cable: 4 meters wire, used the banana plugs, durable and safety
  • Power supply is from the meter, battery is no necessary

Product Details
Product NameLutron CP2000 AC/DC Current Clamp Adapter
PriceRs. 0/-
Current range20A / 200A / 2000A
Safety StandardIEC 1010, Categories III 600V
Weight586 g ( 1.29 LB ).
Range 20A/200A/2000A
MaterialsEnclousre : UL 94-V0 rated.
Operating HumidityLess than 80% RH.
General Specification
Accuracy± 1% F.S. | F.S. : Full scale of range. | 50/60 Hz.. | 23 ± 5 ℃
Conduct SizeMax : 51mm (2.0 inch) Dia
Frequency Range45 to 400 Hz. Accuracy tested under 50/60 H
Jaw OpeningMax Size : 51 mm ( 2.1 inch ) Dia
LoadMin : 100 K ohm for specified accuracy.
Measurement Range20 A/200 A/2000 A, switch selectable
Operating Temperature0 to 50 ( 32 to 122 ).
Output100mV/A, 10mV/A, 1mV/A
Output Sensitivity100 mV/A, 10 mV/A, 1 mV/A, AC coupled.
Power SupplyPower supply is from the meter (DW-6093, DW-6095 ), battery is not necessary. Power supply voltage from DW-6093, DW-6095 is DC 8V± 1V..
Output Voltage2ACV
Dimension240.8 x 90.9 x 38.3 mm. ( 9.48 x 3.58 x 1.5 inch ). | Cable length : 4 meters ( 13.17 feet ). | DC plug size : 5.5 mm x 2.5 mm DIA.

Write a review

Note: HTML is not translated!
Bad Good