Menu
Your Cart
Due to variation in dollar rate, prices are subject to change without prior notice. Please confirm prices before placing an order.

MIDNITE Classic 200 MPPT Charge Controller

MIDNITE Classic 200 MPPT Charge Controller  Price in Pakistan
Inquiry
MIDNITE Classic 200 MPPT Charge Controller
  • Stock: Inquiry
  • Model: SCMN-02
Rs80,000/-

OVERVIEW:

The Classic 200 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 200 has a maximum output current of 79 amps, an operating voltage of 200 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 200 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

Features:

  • 200 operating voltage
  • Max current out: 79 amps
  • ETL listed to UL1741 and CSA
  • Terminals are rated for 75 C
  • Type 1 environmental rating
  • Exclusive HyperVOC extends VOC limits
  • 12-72V battery
  • Built in DC-GFP and Arc Fault
  • Detector
  • Solar, wind and hydro MPPT modes
  • To ensure proper start up and MPPT operation, the minimum initial PV input voltage should be at least 30% higher than the highest expected battery voltage.

Product Details
Product NameMID NITE 200 75-65A 12-72V – 5250 W
PriceRs. 80,000/-
TECHNICAL SPECIFICATION
Battery VoltageCharge: 12-93 Volts
Derated Currentat 40°C (104°F): 66 Amps
General Specification
Current OutputMax at 25°C (77°F): 74A @ 12V | 70A @ 24V | 65A @ 48V
Environment-40°C to 40°C (-40°F to 104°F)
Input VoltageOperating: 200VDC
Dimensions14.87" x 5.95" x 4.00" (378mm x 151mm x 102mm)

Write a review

Note: HTML is not translated!
Bad Good
Captcha