Arduino

OVERVIEW:The 2.4″ Colour TFT display with a micro SD card slot is now available as a SHIELD for Arduino UNO.It has a four-wire resistive touch screen, a micro SD card socket, a reset switch, and a convenient Arduino Uno shield footprint.Features:2.4-inch LCD TFT display has Bright, 4 white-LED backl..

OVERVIEW:Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in the market. It is 100% suitable for beginners. And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yoursel..

OVERVIEW:The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, and a power jack, an ICSP header, and a reset but..

OVERVIEW:Compatible with Arduino Mega pinoutReset the button up topICSP headerLots of GND and +5V railsDIP prototyping area makes it easy to add more chipsSOIC prototyping area above USB jack for up to 14-pin SOIC chip, narrow medium or wide package.Use 'mini' or 'medium' breadboardTwo 3mm LEDs with..

OVERVIEW:Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to suppor..

OVERVIEW:The Arduino Yún is a microcontroller board based on the ATmega32u4 and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWrt named Linino OS. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (..

OVERVIEW:Arduino GPS shield is a GPS module breakout board designed for Global Positioning System receiver with SD interface. It is easy to use for recording the position data into the SD card. 5V/3.3V compatible operation voltage level makes it compatible with Arduino boards, leaf maple, IF..

OVERVIEW:The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side o..

OVERVIEW:Arduino Yun Shield, an extremely powerful development for the Arduino board, is designed to solve the problems of connection and storage which exist in the Arduino board. Arduino Yun Shield runs Open Source OpenWrt System (The same system as runs in Arduino Yun) and it is fully compatible w..

OVERVIEW:The GPS module with NEO-6M U-Blox chip and the external ceramic antenna can be controlled via UART with Arduino and Raspberry Pi after which the position can be retrieved. An LED on the module shows if there is an active connection to a GPS satellite.The module can also be connected to a PC..

OVERVIEW:Go to the “BUY NOW” button and have it at your doorstep. Explore W11stop.com to find the latest “Ardunio” products and other electronic components at discounted prices in Pakistan with cash on delivery service available throughout the country.We are dealing “Ardunio” in Pakistan...

OVERVIEW:This Arduino shield has been designed for Data Logging to an SD card and also has an onboard Real-Time Clock, so you can easily time stamp your readings, you can also use the Adafruit libraries which work great with these!This board is fully assembled with stackable header pins.Just add you..

FEATURES:4 X 2.6 X 3.2CM2 potentiometers for 2 axes1 switchConnector: +5Vcc - GND - VRx - VRy - SWHigh-Quality Atomic MarketDocument:Arduino Joystick Module..

OVERVIEW:The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports),..

OVERVIEW:The Micro is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button...

OVERVIEW:The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always..

OVERVIEW:This is a great battery-backed real-time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for data logging, clock-building, time stamping, timers and alarms, etc. The DS1307 is the most popular RTC and wo..

OVERVIEW:The STM32f4 STM32f407 Discovery Kit for STM32F407  kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accele..