The DMC Series Media Converters and Chassis are a set of standalone Plug-and-Play media converters that offer increased flexibility when expanding a new or network. The DMC Series provides network administrators with a wide variety of solutions to expand networks over a greater distance while maintaining compatibility with existing network equipment.
Meanwhile, the DMC-1014 Media Converter Chassis provides a practical solution for installing multiple media converters in one convenient chassis. This both saves space and optimises cable placement.
Media converters convert signals that are transmitted from one type of media to another so that they can be transmitted over a different type of media. This series of media converters convert 10/100/1000 Mbps copper ethernet to a 100/1000 Mbps fibre optic connection. This allows you to expand your network by connecting longer distances, cables between devices that are otherwise connected with short distance Ethernet cables, such as Cat.6 twisted-pair cables.
Flexible Media Conversion:
Media converters convert signals that are transmitted from one type of media to another so that they can be transmitted over a different type of media. This series of media converters convert 10/100/1000 Mbps coppper Ethernet to a 10/100 Mbps bre optic connection. This allows you to expand your network by connecting longer distance, high-speed fibre optic cables between devices that are otherwise connected with short distance Ethernet cables, such as Cat. 6 twisted-pair cables.
Dedicated Storage Solution:
The DMC Series product lineup includes a wide range of independent media converters as well as the DMC-1014 Media Converter Chassis, capable of housing up to 14 media converters. You can start with a single media converter, equipped with its own housing and AC power supply. As network requirements grow, you can mount the DMC-1014 in your equipment rack and conveniently install all your media converters into the chassis.
The housing of each media converter can be easily removed, allowing it to be installed into the chassis. The installed converter module is then powered by the chassis’ power supply.
- Fast and Easy to Use:
- One channel 10/100/1000 Mbps Ethernet to 1000 Mbps bre optic conversion
- One/Two channel 10/100 Mbps Ethernet to 100 Mbps bre optic conversion
- Plug-and-Play, no additional software required
- Can be used standalone or installed in the DMC-1014 chassis
- Half or full-duplex operation
|Product Name||D-Link DMC-300MSC 100Base-TX to 100Base-FX Media Converter|
|Number of Ports||1 x 10/100BASE-TX RJ-45 port | 1 x 100BASE-FX SC port|
|AC input||• 5 V/1 A external power adapter|
|Data Tranfer Rates||Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex) | Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex)|
|Diagnostic LEDs||Power• Speed (for twisted-pair ports)• Full-duplex/Collision• LINK/ACT (for twisted-pair ports)|
|Duplex Mode||Half-duplex/full-duplex | 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m)|
|Emission Certifications||(EMI) : FCC | CE | VCCI|
|Fibre Wavelength||• 1310 nm|
|Forwarding Rate||Full wire-speed forwarding rate|
|Humidity||5% to 90% RH, non-condensing|
|Media Exchange Interface||Auto-MDI/MDIX|
|Media Types||10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) | 100BASE-FX: Multi-mode fi e optic cable with SC connector (up to 2 km)|
|Standard||IEEE 802.3 for 10BASE-T/F | IEEE 802.3u for 100BASE-TX/FX|
|Supported Fibre Cable Length||Up to 2 km|
|Temperature||Operating: 0 °C to 60 °C | Storage: -20 °C to 70 °C|
|Dimensions||95 x 70 x 26 mm|