deepsea electronics

OVERVIEW:The DSE335 Automatic Transfer Switch Control Module has been expertly developed to monitor the voltage and frequency of an incoming AC supply from two different sources. These sources can be generator or mains (utility), or a combination of both. The control module monitors Source 1 (S1) an..

OVERVIEW:The DSE 6010 MKII is an Auto Start Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets. The DSE Configuration Suite Software Installer should be installed to your laptop/PC hard drive. Once installed the software will..

OVERVIEW:DSE6120 MKII Auto Mains (Utility) Failure Control Module The DSE 6120 MKII is an Auto Mains (Utility) Failure Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets.Features:Configurable staged loading outputs.Engine hours co..

OVERVIEW:The DSE7110 MKII is an Auto Start Control Module with an icon-based display. The control module has been designed to control single diesel or gas gen-set applications. Features:Generator/load current monitoring & protection.Configurable DC, volt-free and staged loading outputs.Gene..

OVERVIEW:DSE7310 MKII Auto Start Control Module The DSE7310 MKII is a powerful, new generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-s..

OVERVIEW:DSE7410 MKII Auto Start Control Module The DSE7410 MKII is an intelligent, powerful auto start control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP. The module is suitable for a wide range of single-set g..

OVERVIEW:The Deep Sea Control Panel is an user friendly controller designed to work seamlessly with Triton diesel generators. Control Panels range from models which manually switch mains, use remote control features or high end models, allowing full synchronization of multiple sets.  These cont..

OVERVIEW:DSE8004 10" Graphical Colour Multi-Set Remote Overview Display The DSE8004 is a full colour 10” graphical remote overview display. It has been designed to seamlessly integrate with DSE86xx and DSE87xx load share control modules. Using an RS485 link a single overview display can be connected..

OVERVIEW:SCADA Suite Software for Windows PC enables remote control and monitoring of DSE73xx, DSE74xx series modules and DSE load share systems comprised of DSE8xxx Series Modules. The DSE8005 SCADA Suite software is available as part of the DSE Configuration Suite download.The DSE Configuration Su..

OVERVIEW:The DSE8620 MKII represents the latest in complex load sharing & synchronising control technology. Designed to synchronise a single genset with a mains (utility) supply, the DSE8620 MKII control module is packed with multiple features and benefits that are unrivalled across the generato..

OVERVIEW:The DSE865 is an intelligent RS485 communications device that allows single or multiple generating sets to be monitored over a LAN or WAN connection. The device includes software to assign a TCP/IP address to a COM port on a PC. Features:Can be used over an internal network and the int..

OVERVIEW:The DSE8680 is an intelligent control module designed to control a generator bus-tie breaker. The control module features technology that automatically manages the synchronising and check-sync across the breaker using the DSE multi-set communications (MSC) link when opening and closing the ..

OVERVIEW:DSE890 DSEWebNet Gateway - 3G (GSM)/Ethernet The Gateway connects to the DSE data server by integral Ethernet connection or GPRS (DSM or 3G mobile internet) and includes GPS (satellite location) functionality. This is most suited to remote and/or mobile locations. A DSE GSM Antenna is requi..

OVERVIEW:The DSE9255 24 volt 5 amp Switch-Mode Battery Charger keeps batteries charged to their maximum capacity at all times. It is designed for permanent battery connection and can be DIN rail or chassis mounted. The charger includes a normal or overload condition LED indicator on the front to ass..

OVERVIEW:The DSE Configuration Suite Software Installer should be installed to your laptop/PC hard drive. Once installed the software will be ready for use immediately. To begin configuring your module type, start by selecting the module you are using. Configurations can then be created and saved fo..

OVERVIEW:The DSE9461 is an intelligent enclosed battery charger that has been developed to offer the highest levels of safety, usability and battery life and performance. The charger can be used straight out of the box or connected to a PC via a USB cable to modify the pre-set charging curves. The c..

OVERVIEW:The DSE9474 is an intelligent 24-volt, 30 amp CAN enabled switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or chassis mount..

OVERVIEW:DSE9701 Vertical 24 volt 5 amp Battery Charger The DSE9701 24 volt 5 amp switch-mode battery charger keeps batteries charged to their maximum capacity at all times. It is designed for permanent battery connection and can be DIN rail or chassis mounted. The charger includes a normal or overl..