Menu
Your Cart
"Due to currency devaluation, the prices are subject to change without prior notice. Please confirm the price before placing the order."

IMR 1400 Flue Gas Analyzer

IMR 1400 Flue Gas Analyzer price in Paksitan
Inquiry
IMR 1400 Flue Gas Analyzer
  • Stock Availability: Inquiry
  • Model: MTAM-337
Product Views: 5190
Rs. 958,820/-

OVERVIEW:

  • The combustion gas analyzer IMR 1400 CO is easy to use, compact and rugged. 
  • Two CO-sensors are installed, one for low measurements and one for high CO-measurements.
  • This helps to get the best possible accuracy for different applications (e.g. wood fired applications). 

Measured Parameters:

  • Oxygen O2
  • Carbon monoxide CO in ppm
  • Carbon monoxide CO in Vol. %

Calculated Parameters:

  • Losses QA
  • Combustion Efficiency ETA
  • Excess Air LAMBDA
  • Carbon dioxide CO2 

  • Case: Rugged aluminum with an additional compartment
  • Sensors: O2-CO-CO
  • Display: Illuminated and simultaneous display of 8 values
  • Fuels:7 programmed; 5 programmable
  • Units:ppm, mg, mg(O2), mg/kWh
  • Interface: RS232
  • Memory:200 measurements
  • „Battery: Status is shown on the LCD; 6 hrs 
  • Printer: Highspeed thermal-printer;
  • Width 58mm; Capable of printing 1, 2, or 3 printouts at once with all values including date, time and fuel type
  • CO-Switch: Solenoid valve to automatically switch between the low and high CO-sensor. 2nd pump to purge the low COsensor (faster regeneration);
  • Soot measurement: Electronic controlled pump
  • Zero-point adjustment:3 min
  • Service program: Component check and printout capability of all parameters;

MEASURES CO2 with NDIR Technology. This latest model does not only measure the most common parameters but also CO2 !!
  • Measures flue-gases of boilers, burners, engines,.
  • Developed to meet the customers need
  • High-quality combustion gas analyzer using the latest sensor technology
  • Easy to use and it measures all important parameters
  • Includes all needed features for a complete analysis

Standard Features:

  • Illuminated display with simultaneous display of 8 measured variables
  • Languages: D, UK, F, USA, E, TR, etc.
  • 7 programmed and 5 programmable fuels
  • Measurement display is switchable between ppm, mg, mg(O2), and mg/kWh
  • Battery status is shown on the measurement display
  • Interface RS 232
  • Printout of all measured and calculated parameters
  • Electronic controlled soot measurement
  • Automatic and manual CO overflow shut-off
  • Automatic zero calibration within 3 minutes. Recalibration within 30 sec.
  • Integrated self-check program for all functions and parameters.
  • After 1000 operating hours a 'Service needed' note appears on the display.
  • Gas sampling probe, length 10.5' (270mm),NiCrNi, flexible hose 11.5 ft. (3,5m)
  • Combustion air probe, length 5' (130mm), line 11.5 ft. (3,5m)
  • Condensation trap with integrated filter
  • Operating temperature 50°F..104°F (10°C..40°C)
  • Storing temperature -4°F..122°F (-20°C..50°C)
  • Power supply  230V/50Hz, 110V/60Hz, 12VDC

Document:

Product Details
Product Name IMR 1400 Flue Gas Analyzer
Price Rs. 958,820/-
Summary
Ambient Temperature Probe: l=150mm; Line 3.5m
TECHNICAL SPECIFICATION
Storage temperature -20°C..50°C
General Specification
Condensation trap Integrated Filter
Gas Sampling Probe Heated handle (soot); l=270mm; ∅ 10mm; Thermocouple Type K; Hose length 3.5m
Operating Temperature 10°C..40°C
Power 12VDC; 240VAC/50Hz; 120VAC/60Hz

Write a review

Note: HTML is not translated!
Bad Good