Your shopping cart is empty!
A stepper motor to satisfy all your robotics
needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a
nice holding torque. The motor was specified to have a max current of 350mA so
that it could be driven easily with an Adafruit motor shield for Arduino (or
other motor driver) and a wall adapter or lead-acid battery.
Some nice details include a ready-to-go cable
and a machined drive shaft (so you can easily attach stuff). We drove it with
an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. To
connect to our shield, put the wires in this order: Red, Yellow, skip ground,
Green, Brown (or Gray).
| Product Details | |
| Product Name | NEMA 17 Stepper Motor |
| Price | Rs. 1950/- |
| Summary | |
| Ambient Temperature | -20℃～+50℃ |
| Inductance Accuracy | ±20% |
| Resistance Accuracy | ±10% |
| Temperature Rise | 80℃ Max |
| Insulation Resistance | 100MΩMin.500VDC |
| Output | |
| Dielectric Strength | 500VAC for one minute |
| General Specification | |
| Shaft Axial Play | 0.08Max.(450g-load) |
| Shaft Radial Play | 0.02Max.(450g-load) |
| Step Angle Accuracy | ±5% |
