Circutor CVM-B150 Panel Mounted Power Analyzer

Features:

• Format: 96x96 (CVM B100) and 144x144 (CVM B150)

• High-resolution VGA colour screen

• IP 65* front panel protection

• 5 voltage inputs (3 phases + neutral + earth) 1000 Vf-f

• 4 Current inputs, ITF

• Class 0.2 voltage and current accuracy

• Class 0.5S energy accuracy

• Expandable unit, up to 4 modules, combining digital and analogue outputs, Modbus/TCP, MBus, LonWorks, Profibus, XML/Web

• Modular (optional addition of expansion modules)

• Touch-sensitive movement buttons

• Universal power supply source

• RS485 communications port (Modbus/RTU and BACnet protocols)

• Customisation of parameters to be displayed

• Operating hour indicator for preventive maintenance.

• Innovative SCV interface (Slide, Choose & View) for versatile data display, enabling the customisation of the parameters displayed on the screen

• Electrical parameters: instantaneous, maximum, minimum (with date and time) and demand

• Incremental electrical parameters (energy), times, costs, emissions

• 3 Tariffs (can be selected via the digital input or RS485 communications)

• Capable of showing costs and kgCO2 emission sources on the screen, depending on the energy consumed or generated

• 2 Relay outputs for alarms with delay, times, ON and OFF, etc.

• 2 transistor outputs for alarms or impulse generation, with all the possible configuration parameters

• 2 digital inputs, with control over the selection of the unit’s tariffs or configurable for monitoring purposes, with RS-485 Modbus communications, monitoring of logical states of other electromechanical units. (RCCBs, thermal-magnetic circuit breakers, etc.)

Applications:

• Control and monitoring of all electrical parameters measured in any electric distribution panel and low and high-voltage connection points.

• 4 alarms (2 per transistor and 2 per relay), fully and independently programmable: low or high value, hysteresis, connection/disconnection delays, normally open or closed standby status and interlocking.

• Generation of impulses with transistor outputs, fully and independently configurable over any incremental parameter (energy, costs, kgCO2 , total meter or tariff hours)

• Transducer that converts analogue signals to any instantaneous parameter that the unit can measure or calculate, with built-in expansion modules with analogue outputs.

• Display of process signals, with a built-in expansion module with analogue inputs; optional reporting of these signals to SCADA systems through communication systems

• Control of electrical load or alarm signal operations by programming the transistor or relay outputs that are built-in or added through expansion modules.

• Autonomous datalogger with web server, connected to a M-CVMAB-Datalogger module. Enables direct monitoring of the historical data stored in the unit via a conventional web browser.

Document: