Teltonika RUT950 LTE 4G Dual SIM Wifi Router

RMS Support:

Mobile:

• Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps.

• SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

• Status: Signal strength, SINR, RSRPO, RSRQ, Bytes sent/received

• Bridge: Direct connection (bridge) between mobile ISP and device on LAN

• SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

• Black/White list: Operator black/white list

• Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services

Wireless:

• Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)

• WiFi: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter

• WiFi security: WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation

• SSID: SSID stealth mode and access control based on MAC address

• WiFi users: Up to 100 simultaneous connections

• Hotspot“ Captive portal (Hotspot), internal/external Radius server , built in customizable landing page

Ethernet:

• WAN: 1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

• LAN: 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network:

• Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)

• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT

• Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

• Firewall: Port forward, traffic rules, custom rules

• DHCP: Static and dynamic IP alocation

• QoS: Traffic priority quening by source/destination, service, protocol or port

• DDNS: Supported >25 service providers, others can be configured manually

• Network backup: VRRP, Mobile, Wired and Wi-Fi WAN options, each of which can be used as backup

• Load balancing: Balance your internet traffic over multiple WAN connections

• NetSnapper (optional): Mobile connection management, data compression VPN client (not available in standard FW)

• SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)

Security:

• Authetication: Pre-shared key, digital certificates, X.509 certificates

• Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

• Atack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

• WiFi security: WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation

• VLAN: Port based and tag based VLAN separation

• Mobile quota control: Set up custom data limits for both SIM cards

• WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN:

• OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods

• OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

• Ipsec: IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

• GRE: GRE tunnel

• PPTP, L2TP: Client/Server services can run simultaneously

Monitoring & Management:

• WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

• FOTA: Firmware update from sever, automatic notification

• SSH: SSH (v1, v2)

• SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET

• TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems

• MQTT: MQTT Broker, MQTT publisher

• SNMP: SNMP (v1, v2, v3), SNMP trap

• JSON-RPC: Management API over HTTP/HTTPS

• MODBUS: MODBUS TCP status/control

• RMS: Teltonika Remote Management System (RMS)

System Characteristics:

• CPU: Atheros Wasp, MIPS 74Kc, 550MHz

• RAM: 128MB, DDR2

• FLASH memory: 16MB SPI Flash

• Firmware / Configuration:

• WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

• FOTA: Update FW/configuration from server

• RMS: Update FW/configuration for multiple devices

• Keep settings: Update FW without loosing current configuration

Firmware Customization:

• Operating system: RutOS powered by Linux based on OpenWRT

• Supported languages: Busybox shell, Lua, C, C++

• Development tools: GPL package with build environment provided

Power:

• Connector: 4 pin industrial DC power socket

• Input voltage range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31VDC 10us max.

• PoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards

• Power consumption: < 2W idle, < 7W Max.

• Physical Interfaces (Ports, Leds, Antennas, Buttons, Sim):

• Ethernet: 4 x RJ45 ports, 10/100 Mbps

• Status LEDs: 1 x bi-color connection status LED, 5x connection strength LEDs, 4x LAN status LEDs, 1x Power LED

• SIM: 2 x SIM slots (Mini SIM – 2FF, 2st form factor), 1.8V/3V

• Power: 4 pin industrial DC power socket

• Anntenas: 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors

• Reset: Reset/restore to default button

Physical Specification:

• Casing material: Aluminium housing, plastic panels

• Dimensions: 80 mm x 106 mm x 46 mm (H x W x D)

• Weight: 235 g

• Mounting options: DIN rail (can be mounted on two sides), flat surface placement

Operating Environment:

• Operating temperature: -40 °C to 75 °C

• Operating humidity: 10% to 90% non-condensing

• Ingress Protection Rating: IP30

• MTBF: 270000 h

Regulatory & Type Approvals:

• Regulatory: CE/RED, FCC, R&TTE, EAC, PTCRB, RoHS, WEEE

• Operator: AT&T, Verizon (planned)

EMI Immunity:

• ESD: EN 301 489 V2.1.1 (EN61000-4-2:2009)

• RF: EN 301 489 V2.1.1 ( EN 61000-4-3:2006, A1:2008 and A2:2010)

• EFT: EN 301 489 V2.1.1 (EN 61000-4-4:2013)

• Surge protection: EN 301 489 V2.1.1 (EN 61000-4-5:2014)

• RC: EN 301 489 V2.1.1 (EN 61000-4-6:2014)

Environmental Testing:

• Anti-shock/Drop/Vibration: IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013, EN 60950-1:2006 + A1:2010 + A2:2013 + A11:2009 +A12:2011

• Impact strength: IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013, EN 60950-1:2006 + A1:2010 + A2:2013 + A11:2009 +A12:2011

Document: