DT830D Digital Multimeter

OVERVIEW:

The DT830D Digital Multimeter is a very affordable and handy piece of test equipment. It features an easy to read 3.5 digit LCD display. It is equipped with 5 functions and 19 ranges, each test position is quickly and easily selected with a simple turn of the single selector switch.

• To avoid possible damage to the meter or to the equipment under test, follow these guidelines:
• Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
• Use the proper terminals, function, and range for your measurements.
• Before measuring current, check the meter's fuses and turn the power off to the circuit before connecting the meter to the circuit.
• Before rotating the range switch to change functions, the disconnect test leads from the circuit under test.
• Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
• Remove test leads from the meter before opening the Meter case.
• To avoid possible damage to the meter or to the equipment under test, follow these guidelines:
• Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
• Use the proper terminals, function, and range for your measurements.
• Before measuring current, check the meter's fuses and turn the power off to the circuit before connecting the meter to the circuit.
• Before rotating the range switch to change functions, the disconnect test leads from the circuit under test.
• Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
• Remove test leads from the meter before opening the Meter case

Features:

• Small multimeter for your day to day needs
• If you have basic knowledge about multi meters you can try this small multimeter for basic continuity checks and voltage measurements
• When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to V 0 mA jack and black test lead to the COM jack
• When testing the current more than 200mA, connect the red test lead to OADC jack and black test lead to the COM jack
• When testing the temperature, connect the temperature probe to V 0 mA jack or COM jack. Please refer to the attached instruction manual for the operating instructions.

Document:

DT830D Digital Multimeter