Fuji MS4S-A-AP Contact Timer (8 Pin)

OVERVIEW:

• Time-scale indication window and time-scale selector
• By turning a time-scale selector, thetiming-scales appear in the indication windows one set a time. Although this is a multimode timer, the optional times such as 56 or 27minutes can be easily set with the direct-reading time-scale.
• Compact timer with instantaneous contact
• On-delay timers with instantaneous contact, as well as multimode and on-delay timers, are compact. The front to back length of the timers is only 66.5mm.
• Operation mode indication window and operation mode selector
• Four operation modes are provided(MS4SM type only).
• By turning the operation mode selector, the on-delay, flicker, one-shot, or signal off-delay operation mode can be selected. The presentmode is shown in the operation mode indication window with the marks PO, FL, OS or SF.
• LED power ON and output indicator
• The power-source lamp (Green) is lit when power is on and flickers during timer operation.
• The output lamp (Red) is lit when the timed NO contact is on.
• Wide range of AC supply voltage
• Supply voltages of 100 to 240V AC are commonly available (ordering code: AP type only).
• Instantaneous operation function with 0 indication
• When the timer dial is set at 0, output is given instantaneously, allowing sequence checks to be performed easily.
• Time unit indication window and time unit selector
• By turning the time selector, time units of 0.1 sec., sec., min, and hours. can be selected and made to appear in the indication window.
• Improvement of resistance to waveform distortion
• The resistance to distortion of secondary voltage waveform of the power supply caused by inverters and uninterruptible power supplies (UPS) is improved.
• UL, and TÜV approved