Hanna BL983317-1 EC Mini Conductivity Controller
Rs. 70,000/-
Hanna BL983317-1 EC Mini Conductivity Controller price in Pakistan is
Rs. 70,000/-
. W11stop.com has wide range of Industrial Automation & Circuit Protection with cash on delivery service in Karachi, Lahore, Multan, Peshawar and many other cities.
OVERVIEW:
The BL983317 is a compact, panel-mounted, process controller for measuring the conductivity of a process stream. The device features a large LCD with a protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when reading is below the set point.
The relay can be used to activate a dosing pump to add chemicals until the desired set point is reached. Chemicals that can be dosed include nutrient solutions.
The BL983327 is a closely related product that has the same measurement range but has a relay that is activated when the reading is above the set point.
- Multicolor LED Indicator
- Fire Retardant Casing
- Fire Retardant Casing
Adjustable Dry Contact Dosing Relay:
The BL983317 features a dosing relay that is activated when the reading is below a user-programmable set point.
Programmable Overdose Protection:
For enhanced safety, the mini controller can be programmed to deactivate the dosing relay if the setpoint is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.
Relay Control Override:
With the flick of a switch the mini controller’s relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.
Multicolor LED Indicator:
- Multicolor LED indicator allows an operator to quickly check the status of the controller.
- Green = Meter in measurement mode and reading is above the set point.
- Orange/Yellow = Reading is below the setpoint and the relay is active.
- Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.
Fuse Protected Dosing Contacts:
- The relay dosing contact is rated for up to a 2A load and is fuse protected.
- Labeled Termination Connections:
- Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.
Document:
| Product Details | |
| Product Name | Hanna BL983317-1 EC Mini Conductivity Controller |
| Price | Rs. 45000/- |
| Summary | |
| Calibration | manual, with CAL trimmer |
| TECHNICAL SPECIFICATION | |
| Temperature Compensation | automatic from 5 to 50°C (41 to 122°F) with beta =2%/ºC |
| General Specification | |
| Accuracy | ±2% full scale |
| Dosing Relay | maximum 2A (fuse protected), 250 VAC, 30 VDC |
| Dosing Selection | relay activated (contact closed) when the measurement is less than the setpoint |
| Overtime | adjustable, typically from 5 to approximately 30 minutes |
| Range | 0.00 to 10.00 mS/cm |
| Resolution | 0.01 mS/cm |
| Setpoint Range | adjustable from 0 to 10 mS/cm |
| Weight | models “-0”: 200 g (7.1 oz.) | models “-1”: 300 g (10.6 oz.) |
| Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) |
| Power Supply | models “-0”: 12 VDC adapter (included) | models “-1”: 115/230 VAC; 50/60Hz |
