Your Cart
"Due to currency devaluation, the prices are subject to change without prior notice. Please confirm the price before placing the order."

Hanna HI8043 Portable Dissolved Oxygen Meter

Hanna HI8043 Portable Dissolved Oxygen Meter price in Paksitan
Hanna HI8043 Portable Dissolved Oxygen Meter
  • Stock Availability: Inquiry
  • Model: HANS-05
Product Views: 3419
Rs. 53,000/-


HI 8043 is a portable meter for Dissolved Oxygen measurements. It is housed in a lightweight case, with an easy-to-read LCD. Dissolved oxygen and temperature measurements can be performed in the field (wastewater treatment, fish-farming, water analysis, etc.) as well as in the laboratory without compromising accuracy. Dissolved oxygen is indicated in mg/L (ppm) and the reading is compensated for the temperature effect (ATC).
The dissolved oxygen probe is provided with a membrane for covering the polarographic sensors, and features a built-in thermistor for temperature measurements and compensation.

This meter can operate continuously for approximately 100 hours on one 9V battery. The HI8043's low battery warning helps reduce the possibility of taking an erroneous reading due to low power. The easy dial on this meter is it's greatest asset. Select the O₂ mode and the polarographic probe will supply you with accurate dissolved oxygen measurements in mg/L. Switch the dial to °C to display the temperature readings. The standby mode (stb) is particularly useful to keep the current flowing through the probe which is continuously polarized and ready for use.


  • Automatic Temperature Compensation (ATC)
  • Manual, Two-point Calibration
  • Low Battery Indicator


Product Details
Product NameHanna HI8043 Portable Dissolved Oxygen Meter
PriceRs. 53,000/-
General Specification
Battery Type9V / approximately 100 hours of continuous use
Dissolved Oxygen Accuracy±1.5% F.S.
Dissolved Oxygen Calibrationmanual, two points (zero and slope)
Dissolved Oxygen Range0.00 to 19.90 mg/L (ppm)
Dissolved Oxygen Resolution0.01 mg/L (ppm)
DO ProbeHI76401 polarographic DO probe with internal temperature sensor, DIN connector and 3 m (10’) cable
Weight240 g
Dimensions180 x 83 x 40 mm (7.1 x 3.3 x 1.6”)
Environment0 to 50°C (32 to 122°F); RH max 95%

Write a review

Note: HTML is not translated!
Bad Good