KYORITSU KEW 5410 RCD Tester
- Measurement of RCD trip time Conducting testing of rated residual non-operating currents at × 1/2 Range, measuring RCD trip time at × 1 and × 5 Ranges.
- Measurement of trip out current Measuring trip out current by varying current automatically.
- Remote Test Enabling a user to hold the Test Leads with his both hands by locking the Test Button. Measurement will automatically start when the main voltage is detected.
- Voltage Measurement Carrying out a constant measurement of voltage in the range
- stand-by mode at each Range.
- Auto-detection of Contact voltage detecting the voltage to earth of Earth electrodes or protective conductors during RCD test - when applying test currents - at measurement using EARTH in order to prevent electrical shocks caused by the damaged earth. Measurement will be ceased at AC50V or more.
- Dust- and Water-proof dust- and Water-proof construction(designed to IEC 60529 IP54).
- BacklightFacilitating working at dimly illuminated locations.
|Product Name||KYORITSU KEW 5410 RCD Tester|
|Rated Voltage||100V±10%, 200V-10%～+32%, 400V±10%, 50/60Hz|
|Display||1999 counts (3 1/2digits), Large LCD|
|Applicable standards||IEC 61010-1 Pollution degree2 CAT III 300V / CAT II 400V IEC 61010-031 IEC 61557-1, 6 IEC 60529 (IP54)|
|Included Accessories||7128A (Test leads) 7129A (Test lead with alligator clip) 8017 (Long pin) × 2 Cord case, 9121 (Shoulder strap), Instruction manual, R6(AA) × 8|
|Operating temperature & humidity range||0ºC - 40ºC, relative humidity 85% (no condensation)|
|Optional Accessories||7100A (Precision measurement cord set)|
|Overload protection||Earth Resistance: 280V AC for 10 seconds across 2 of the 3 terminals Earth Voltage: 300V AC for 1 minute|
|Safety Standard||IEC 61010-1 CAT III 300V Pollution Degree 2, IEC 61557|
|Storage temperature & humidity range||-20ºC - 60ºC, relative humidity 85% (no condensation)|
|Accuracy||(Measurement of RCD trip time - Measurement of trip out current) (Trip Time) (× 5) 1%rdg±3dgt, (x 1) 1%rdg±3dgt, (x 1/2) 1%rdg±3dgt, (AUTO RAMP mA) Test Current at each step -4%～+4% (Trip Time) (× 5) +2%～+8%dgt, (x 1) +2%～+8%dgt, (x 1/2) -8%～-2%dgt (Voltage Measurement) 2%rdg±4dgt|
|Measuring range||Testing time = 0ms～200ms Testing time = 0ms～2000ms Testing time = 0ms～2000ms 40% - 110% of lΔn (goes up by 5%) Testing time 300ms × 15steps (Voltage Measurement) 80V～450V 50/60Hz|
|Weight||Approx. 965g (including batteries)|
|Insulation Resistance||50MΩ or more / 1000V (between electrical circuit and enclosure)|
|Range||(x 5) (x 1) (x 1/2) (AUTO RAMP mA)|
|Test Current (approx.)||15/30/50/100mA, 15/30/50/100/200/500mA, 15/30/50/100/200/500mA|
|Power Source||DC 12V / R6(AA)(1.5V) × 8|