PROVA 136 Temperature Calibrator (RTD + TC)

• High precision and combination of RTD and Thermocouple (TC) calibration

• Source and measure 14 types of RTD and resistance

• Source and measure 11 types of thermocouples (TC)

• 4W, 3W, and 2W connections for RTD simulation and measurement

• Current calibration of 4 fixed values (100μA, 250μA, 1mA, and 2mA)

• ℃ and ℉ selectable

• Accept wide range of excitation current (0.05mA to 5mA) for RTD simulation

• Individual cold junction compensation (CJC) for simulation and measurement of thermocouples.
• CJC can be used to fine tune temperature calibration.

• Easy 0% and 100% setup and operation

• Easy 25%▲ (up) and 25▼ (down) for temperature calibration.

• Individual memory of 0% and 100% setup for different RTD types and thermocouple types

• Auto step and auto ramp for easy linear calibration

• Detection of too low or too high excitation current (LO or HI) from the measurement device

• Warning of exceeding calibrator driving current (IEX)

• Memory of last setup when power off

• Easy numerical keypad for input

• Dot Matrix LCD with backlight

• Very low power consumption of 30mA with backlight off

• 15 minutes smart auto-power-off. 15 minutes timer resets itself when any input changes

• 2 minutes smart auto-backlight-off. 2 minutes timer resets itself when any input 

Document: