Sonel MIC-10k1 Insulation Resistance Meter

Features:

• Graphical visualization of the measurement process combined with numerical values provides a reliable picture of insulation condition throughout the measurement cycle.

• Sliding tags allow you to check the minimum and maximum resistance values and leakage current recorded on the measurement chart.

• The maximum voltage of 10 000 V and the measurement range of 40 TΩ ensures the measurements on the most effective materials used to insulate high voltage objects.

• Efficient inverter with a power of ~60 W, will intensify the potential damage point to facilitate the location of the fault using reflectometric methods.

• Designed for the toughest working conditions with airtight suitcase housing.

• Compliance with the recommendations of IEEE Std 43™ provides an option of diagnosing rotating machines.

• Dedicated AutoISO-5000 adapter will shorten time of connection works when measuring resistance in multi-core cables, e.g. of street lighting.

• High resistance to electromagnetic interference guarantees uninterrupted work in power stations and in close proximity to high voltage transmission lines - 765 kV.

• Built-in discharge resistor will fully reduce electric charge, accumulated during the measurement of very long cables, securing the meter.

• When there is no historical data, the meter will assess the insulation condition by determining the polarization index (PI) and the absorption coefficient (DAR), it will also measure the time constant (TC), leakage current IL , discharge coefficient of the dielectric (DD) and the capacitance (C), which confirms that it is a complex diagnostic tool.