Menu
Your Cart

Fluke 787 ProcessMeter Digital Multimeter

Fluke 787 ProcessMeter Digital Multimeter
Fluke 787 ProcessMeter Digital Multimeter
  • Stock: In Stock
  • Brand: Fluke
  • Model: MTDM-74
Rs140,000/-

OVERVIEW:

The Fluke 787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. It's a maintenance and calibration tool that will be at home in every instrumentation technician's toolbox. Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 1 microamp resolution and 0.05% accuracy. It puts a complete solution for troubleshooting and calibrating current loop applications in the palm of your hand so you can get more information, faster and easier.

So if you're tired of having to track down a calibrator, lugging around two tools, and switching back and forth, get the convenient solution for doubling your power. The 787 ProcessMeter from Fluke.

 

Features:

  • DMM and a loop calibrator in one rugged, handheld tool
  • Provides a precision 1000 V, 440 mA True-RMS digital multimeter designed to meet 1000 volt IEC 1010 CAT III standards
  • Features a clear LCD with backlight; 4,000 counts (30,000 counts for DC current)
  • Performs frequency measurements to 20 kHz
  • Provides Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper
  • Displays simultaneous mA and % of scale readout
  • Provides 20 mA DC current source/loop calibrator/simulator
  • Manual step (100%, 25%, Coarse, Fine) plus auto step and auto ramp
  • Externally accessible battery for easy battery changes
  • 1000 V overload protection on V, ohms, frequency
  • 150 V overload protection on mA, backed up by 440 mA 1000V fuse

 

Document:

Fluke 787 PDF

Summary
Current MeasurementRange : 0-1 A, Resolution : 1 mA, Accuracy : 0.2% + 2 LSD, Range : 0-30 mA, Resolution : 0.001 mA, Accuracy : 0.05% + 2 LSD
Safety StandardElectrical : Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92
ResistanceMeasurement : To 40 MΩ, 0.2% + 1 LSD
Weight369 g
Humidity (without condensation) : 95% up to 30°C 75% up to 40°C 45% up to 50°C 35% up to 55°C
Size32 x 87 x 187 mm
HARDWARE FEATURES
Battery life50 hours typical (measurement), 12 hours typical (sourcing 12 mA)
Current SourcingRange : 0-20 mA or 4-20 mA, Resolution : 0.05% of span, Drive Capability : 500 Ω @ 24 mA
Voltage MeasurementRange : 0-1000 V AC or DC, Resolution : 0.1 mV to 1.0 V, Accuracy : 0.1% Rdg + 1 LSD (VDC)
TECHNICAL SPECIFICATION
Maximum Voltage1000 V rms
Operating Temperature-20°C to 55°C
Storage temperature-40°C to 60°C
General Specification
BatterySingle 9 V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61)
FrequencyTo 19.999 kHz, 0.005% + 1 LSD

Write a review

Note: HTML is not translated!
Bad Good
Captcha